A CCTV system can have several cameras and still miss the moment that matters. Poor placement, excessive height, backlighting and overlapping views can leave entrances, driveways or side access less protected than expected. The goal is useful evidence and sensible coverage, not simply the highest camera count.
Purpose of this guide
This page helps you identify the pattern of the fault so Wavexa can diagnose it efficiently. It is not intended as a step-by-step repair guide.
What the symptoms can indicate
The pattern matters.
People are visible but faces are difficult to recognise
The camera may be too high, too wide or positioned at an unhelpful angle.
Night images are washed out or too dark
Lighting, reflections or infrared behaviour may be affecting the image.
The driveway is covered but the approach is not
The system may be recording the destination rather than the route a visitor takes.
A camera repeatedly triggers on irrelevant movement
Field of view and detection zones may need a better design.
Common causes
What Wavexa would consider during diagnosis.
Cameras positioned for appearance rather than evidence quality
Too wide a field of view for the area that matters
Backlighting from windows, sky or exterior lighting
Blind spots around side gates, porches or vehicle approaches
Poor cable route influencing camera position
Incorrect detection or notification settings
Useful information
What to note before Wavexa attends.
You do not need to dismantle or reconfigure anything. These simple observations can make the diagnosis faster:
Which entrances and areas matter most to you
Whether your priority is people, parcels, vehicles or general deterrence
Areas currently missed by an existing system
Where power/network equipment is located
Any concerns about neighbouring property or privacy
Professional diagnosis
How Wavexa approaches the problem.
Wavexa can plan camera positions around the actual security objective, cable routes and viewing angles. Existing systems can also be assessed to identify blind spots, poor image geometry and setup issues before adding unnecessary cameras.
Need this fault checked?
If your current CCTV does not show the areas clearly enough, or you are planning a new system, Wavexa can assess the property and design useful coverage.
